设为首页 | 加入收藏

ddd

新闻中心

手机:
(0)13771026479

 

地址:
江苏无锡市新区新世界国际B-14幢

 

新闻中心 您当前所在的位置: 首页>>新闻中心

环氧耐磨地坪

作者:匿名    访问量:4586    发布时间:2014/1/3

本文由无锡奥科涂装工程有限公司提供,更多环氧地坪漆资讯请访问www.psdang.com

 

    耐磨地坪以其坚固耐用,造价较低得到了很多对清洁要求不高,有重载的客户青睐。但是一次性成型,且需要与混凝土施工人员合作,施工难度大。本网站先招有实际耐磨地坪施工经验5年以上的人担任本专栏主持人,交流经验。共同进步。
    耐磨环氧地坪完工后(视天气温度情况),用水加PVC薄膜或专用养护剂,涂敷耐磨地坪表面进行养护,防止其表面水分激烈蒸发,保障耐磨地坪强度的稳定,养护时间为七天。
施工方案:
一、初次刮除浮浆
混凝土在浇注一定时间后(具体时间因气候定)用橡皮推刀刮除水,浮浆
耐磨地坪施工工序:
第一次提浆
第一次撒布
整平提浆
第二次撒布材料
二次撒布材料提浆
第三次撒布材料
在气温偏高的情况下,因混凝土凝固较快也可分二次,完成撒布材料
收光作业

Wear-resisting flooring, with its strong and durable, low cost got a lot to clean request is not high, overloaded with customers.But one-time molding, and need to cooperate with concrete construction personnel, construction is difficult.This web site to recruit has actual wear-resisting floor construction people experience more than five years as the column host, exchange experience.Make progress together.Wear-resisting flooring is completed (depending on the weather temperature), water with PVC film or special curing agent, curing coating wear-resisting flooring surface, preventing the surface water evaporation, guarantee the stability of wear-resisting floor strength, curing time for seven days.Construction plan:One, the first shave their bleedingConcrete after pouring time (the specific time for climate) with rubber push the knife in addition to the water, float pulpWear-resisting floor construction process:The first mention of pulpAnd for the first timeLeveling up pulpThe second cloth materialSecondary plasma spraying materialThe third cloth materialIn the case of the temperature on the high side, because the concrete setting also can be divided into two times faster, and complete cloth materialCollect light work

 无溶剂型环氧树脂防静电地坪

博亿堂国际-博亿堂娱乐在线-博亿堂手机版